Concrete Terrazzo is an Inorganic Stone can be applied for interior and exterior floor and wall, worktops. It is mainly made of marble craps, so it can highly restore the unique texture of marble. Its semi-industrialized building material characteristics bring up the advantages of standardized mass production, which is not easy to crack, make up for the natural defects of non-standardization of marble, and use the collision of different stone materials to deduce a new aesthetic combination. Technological inorganic concrete terrazzo has the life of coexistence with architecture. The energy-saving characteristics of recycling waste are high-quality building materials with natural, aesthetic and environmental characteristics at the same time.
The high plasticity of inorganic terrazzo is embodied in its super-long plate and special-shaped workpiece. It is superior to marble and magnetic brick in permeability and water absorption.
|Color Name:||Scuro Grey, Grey Terrazzo|
|Base:||525 Porland Concrete|
|Color Tone:||Light Grey|
|Aggregate:||Light Grey Marble aggregate size 2-5mm, 5-10mm|
|Finish:||Polish, Leather, Bush Hammered, Sandblasted, Flamed etc.|
|Tile Size:||30x30, 40x40, 30x60, 60x60, 80x80, 60x120cm etc.|
|Slabs Size:||2400x1600 normally, Maximun Size 3200x1600mm|
|Thickness:||20mm regularly. 25mm, 30mm full block cutting are ok|
|Packing:||Slabs: Strong Wooden bundles|
Tiles: Wooden Crate with Plastic form protection.
|HS. Code:||6810199000 Concrete Terrazzo Stone Products|
|Density:||2540 kg/m3, 20mm:about 50kgs/m2|
|Sample Charge:||Small sample available by Free|
|Sample Freight:||Up to the client. Prepaid freight is about 35USD-50USD for 1kg sample|
|Application:||Interior and Exterior Floor Tiles or Wall Facade,|
Countertops, Worktops, Bench tops, Table Tops, Vanity tops, Kitchen Flooring, Bathroom Shower Wall etc.
Terrazzo Production Technology:
1. Mix the Cement and Marble Scraps into mold
2. Press it into blocks with a hydraulic Press
3. Seal set and solidified for 28days to get terrazzo block
4. Cut the block into slabs of the required thickness
5. Polished the Slab surface or make into the requested surface.
6. Cut to the Customized Size or Shape
7. Do the waterproof treatment on the surface as requested.
8. Wooden Crate packing and logistics distribution.
|Test Report by SGS|
|Essential Characteristics||Performance||Harmonised Technical Specification|
|Apparent Density||2460 kg/m3||EN 14617-1:2013|
|Water Absorption||3.11%||EN 14617-1:2013|
|Flexural Strength||9.3 MPa||EN 14617-2:2016|
|Abrasion Resistance (polished)||40.5 mm||EN 14617-4:2012|
|Freeze and Thaw Resistance||8.8 MPa||EN 14617-5:2012|
|Slip Resistance (polished)||SRV “dry”: 36||EN 14231:2003|
|SRV “wet”: 11|
|Compressive strength||97 MPa||Refer to EN 14617-15:2005|
|Reaction to fire||Classification: A1||EN 13501-1:2007+A1:2009|